P-M-P APPLICATORS are designed and manufactured to provide ease of application and even coating of P-M-P LUSTER FINISH. If oxidation remains after cleaning, scrub with 600 to 1000 grit wet-n-dry sandpaper. Last step not applicable for white surfaces. APPLICATION: Make sure surface is thoroughly dry. Apply in an area that is as dust free as possible. If using outdoors, be sure to apply on a calm day to eliminate dust and dirt contamination.

For best results, surface should be between 55 to 95 degrees Fahrenheit, and not hot to touch. Coats may be applied in direct sunlight. Pour a small amount of P-M-P LUSTER FINISH in a shallow container, saturate one applicator completely and then ring it out. Hold applicator flat to the surface and apply slowly with long straight strokes.

The P-M-P APPLICATOR is designed to yield a more professional job. Avoid going over same area with an additional application until the previous coat is dry. Do not worry about slight streaking or disappearance during the first applications. Drying time should be at least 1 to 4 minutes between coats. Wash the P-M-P APPLICATORS in hot soapy water after using and store in sealed container.

P-M-P LUSTER FINISH is not intended for use on automobiles or textured surfaces. Check for desired results with a small test area. Each coat will increase luster, therefore maximum appearance will require 5 coats. Allow completed application 24 hours for curing. Maintain with mild detergent or P-M-P Wash-N-Wax.

P-M-P LUSTER FINISH provides excellent protection for metals such as stainless steel, brass, bronze and chrome. Rub rails, handrails and deck fittings may also be treated to give long lasting protection.

P-M-P LUSTER FINISH improves the appearance and protects aluminum boats, outboard motors, dock boxes, tackle boxes, deck furniture, fishing tackle and other fiberglass products. Do not allow product to freeze.

Avoid sodium hydroxide based cleaners. Avoid ammonia-based cleaners. Keep out of reach of children.
Should damage occur, P-M-P LUSTER FINISH may be touched up and color differences will blend within a week.